Since Spring is finally here, I thought I'd share with you my Spring and Summer canvas art. Each has a watercolor paint background. All the images were cut using the Flower Market Cricut Cartridge with lots of various colored cardstock. Both are 10" x 10", and will brighten any wall. : )
Showing posts with label Cricut. Show all posts
Showing posts with label Cricut. Show all posts
Monday, March 18, 2019
Thursday, January 24, 2019
January 2019 Slide Up Cardaholics' Card
Today I'd like to share with you my card for my Cardaholics exchange. It's called a pop up card, but I think it should be called a slide up card.
I made them with fun colors, although two families, because I couldn't decide which I liked better. The front two cards are in the envelope ready position. Then the middle part slides upward to create a self standing card. Thus "slide" rather than "pop". : )
The base of the card measures 4.25" x 11". You're going to score along the 11" side at 1", 2.75", 3.75", 5.5", 7.25", 8.25", and 10". The focal consists of several layers:
Cardstock layer: 2.75" x 5.5" - here it's Canary and Lemon
Focal mat layer: 2.5" x 5.25" (there's another one this size on the back for you to write a greeting and is cardstock) - here it's B&T and white cardstock (on the back)
Focal layer: 2.25" x 5" - here it's Sweet Leaf and Lilac
The front "celebrate" was stamped on B&T paper that measures 0.75" x 4"
On the 5.5" score line, you are going to want to cut out a slit from about 0.75" to 3.5" on either side of the score line. That's creating the space needed to have the focal slide through so it can stand.
Willow Card:
| Item # | Description |
| X6026 | Willow cardstock |
| X6008 | Lemon cardstock |
| X7240B | Something Fierce Paper Collection |
| Z2807 | Willow Ink |
| Z2812 | Raspberry Ink - second generation |
| Z6502 | Peach Ink - base of icing |
| Z6508 | Bluebird Ink - cupcake wrapper and candle |
| Z2808 | Lemon Ink - flame |
| Z1979 | Journaling Pen - around "celebrate" |
| Z3189 | White & Gold Ribbon |
| D1827 | Years of Sweetness stamp set |
| retired | Confetti Embossing Folder |
| retired | various ribbon |
Thistle Card:
| Item # | Description |
| X6024 | Thistle cardstock |
| X5998 | Canary cardstock |
| X7242B | I Heart Us Paper Collection |
| Z2840 | Thistle Ink |
| Z2812 | Raspberry Ink - second generation |
| Z6502 | Peach Ink - base of icing |
| Z2895 | Lagoon Ink - cupcake wrapper and candle |
| Z2808 | Lemon Ink - flame |
| Z2805 | Black Ink |
| D1827 | Years of Sweetness stamp set |
| retired | Confetti Embossing Folder |
| retired | various ribbon |
Tuesday, October 16, 2018
National Boss's Day Gift
Today, October 16, 2018 was National Boss's Day. I made these for my boss. Yes, I'm a kiss up. : )
I cut the words from vinyl after typing them into Design Space, and put them on the clipboards. I covered the tops of the pad of paper with B&T paper. Even though the papers cover the quotes, it's fun to take the pads off and be inspired.
Voila! Instant gifts!
I cut the words from vinyl after typing them into Design Space, and put them on the clipboards. I covered the tops of the pad of paper with B&T paper. Even though the papers cover the quotes, it's fun to take the pads off and be inspired.
Voila! Instant gifts!
Wednesday, June 13, 2018
Sweet 16 Birthday Card
What have I been up to? One thing is that my (now) 16 year old asked me to make her birthday party invitations! No hinting/asking/pleading on my part. In fact, I think last year we just sent out an evite! Of course I couldn't say "no". : )
Even though the paper is gone, I love the feel and colors of Chelsea Gardens, so that's the paper I chose for the invites. Lindsey wanted some bling, so I pulled out my stash of Sea Glass Glitter Paper and my Cricut Collections.
The pattern came from Make it from Your Heart Vol. 4; pattern #15. The Heather behind the "Sweet" is actually the zip strip from one of the Chelsea Garden's B&T paper. I cut it in half and adhered it to the back of the White Daisy paper. The circle is also Heather cardstock. The other colored cardstock is Sweet Leaf ("Sweet"), Juniper (between the B&T papers), and Crystal Blue.
This card went together really fast conceptually. And assembling the 21 cards went quickly too. Lindsey adhered the two "Sweet"s together, added the "16" to the circles, and added thin foam to the backside of the Heather circles.
Even though the paper is gone, I love the feel and colors of Chelsea Gardens, so that's the paper I chose for the invites. Lindsey wanted some bling, so I pulled out my stash of Sea Glass Glitter Paper and my Cricut Collections.
The pattern came from Make it from Your Heart Vol. 4; pattern #15. The Heather behind the "Sweet" is actually the zip strip from one of the Chelsea Garden's B&T paper. I cut it in half and adhered it to the back of the White Daisy paper. The circle is also Heather cardstock. The other colored cardstock is Sweet Leaf ("Sweet"), Juniper (between the B&T papers), and Crystal Blue.
This card went together really fast conceptually. And assembling the 21 cards went quickly too. Lindsey adhered the two "Sweet"s together, added the "16" to the circles, and added thin foam to the backside of the Heather circles.
Friday, August 4, 2017
Flower Market - Page 29 Key
Today's installment has Jill talking about how to layer, and what can be done with changing sizes.
Supplies used today include:
Supplies used today include:
| Item Number | Description |
|---|---|
| D1706 | School Kids (globe card) |
| A1182 | Etched Alphabet |
| X7211B | Jeepers Creepers Paper - RETIRED - can use any grey background paper (layout, globe card) |
| Z3255 | Whimsy Fundamentals (flowers and title on layout) |
| X5789 | Sea Glass Cardstock (Retired) (layout container, hydrangea card, globe card) |
| 1385 | White Daisy Cardstock (layout base) |
| 1388 | Colonial White Cardstock (layout, hydrangea card) |
| X5637 | Sweet Leaf Cardstock (layout, hydrangea card, globe card) |
| Z2872 | Whisper Ink (hydrangea card) |
| Z891 | VersaMark Pad (globe card) |
| Z2068 | Ranger Super Fine White Embossing Powder (globe card) |
| Z555 | Craft Heater (globe card) |
| Z3269 | You & Me Complements (hearts on layout) |
| Z3287 | Whimsy Ribbon Pack (hydrangea card) |
| Z3285 | Flower Market Cricut Collection |
Thursday, May 25, 2017
Flower Market Chrysanthemum Cardaholics May 2017 Card
I created my Cardaholics card and thought you'd like to see. : ) This month's challenge was to have a flower. I love our Flower Market cartridge and wanted to use a flower from there. I had LOTS to choose from! I settled on the chrysanthemum flower. Well, here, take a look.
I started with a 4.25" x 4.5" piece of Background and Texture (B&T) paper. The above B&T paper is from La Via En Rose (retired). This the actual card I'm exchanging. Below I used Some Kind of Wonderful paper (retired). On the back side of the paper, I measured 1.5" from the top (4.25" width of the card) and marked on the LEFT side. I then measured 1.5" from the bottom and marked the RIGHT side. Next, you'll cut from those two marks (yes, you are cutting the opposite direction than the card, but that's because we marked the back side). So, now you have the correct orientation of the B&T. The bonus is that you can make 2 cards from 1 piece of paper.
The B&T gets adhered to the upper portion of the card. Below that I added White Shimmer Trim (Z3024). I liked it, but thought to dress it a little bit more. That's when I reached for my Rose Gold Foil Tape (Z3218). I put that right on top of the shimmer trim.
Problem, Will Rogers! The Foil Tape is a lot like Washi tape and doesn't stick well.
Liquid Glass (Z679) to the rescue!! I put a very thin line of Liquid Glass down on the center of the Shimmer Trim, placed the Rose Gold Foil Tape on top, and cheers all around!!
Now the flower. I doubled all of the colors rather than having even more shades of the flower. The Chrysanthemum can be found on page 47 of the booklet. The colors I used (from back to front) were Sapphire (X5774), Pacifica (X5759), Lagoon (X5762), Crystal Blue (1292), Glacier (X5770), and Sea Glass (X5789). To glue each layer together, I used Bonding Memories (Z553 or 1512). I then adhered the entire flower to the center of the Rose Gold Foil Tape with Liquid Glass. Finally, I finished the flower off with a White (or Black) dot from Black and White Dots (Z3314).
The saying is from the Flower Market Cricut Bundle (Z3285 or digital Z3290) stamped in Black ink (Z2805). Shop for your supplies to make your own!
I started with a 4.25" x 4.5" piece of Background and Texture (B&T) paper. The above B&T paper is from La Via En Rose (retired). This the actual card I'm exchanging. Below I used Some Kind of Wonderful paper (retired). On the back side of the paper, I measured 1.5" from the top (4.25" width of the card) and marked on the LEFT side. I then measured 1.5" from the bottom and marked the RIGHT side. Next, you'll cut from those two marks (yes, you are cutting the opposite direction than the card, but that's because we marked the back side). So, now you have the correct orientation of the B&T. The bonus is that you can make 2 cards from 1 piece of paper.
The B&T gets adhered to the upper portion of the card. Below that I added White Shimmer Trim (Z3024). I liked it, but thought to dress it a little bit more. That's when I reached for my Rose Gold Foil Tape (Z3218). I put that right on top of the shimmer trim.
Problem, Will Rogers! The Foil Tape is a lot like Washi tape and doesn't stick well.
Liquid Glass (Z679) to the rescue!! I put a very thin line of Liquid Glass down on the center of the Shimmer Trim, placed the Rose Gold Foil Tape on top, and cheers all around!!
Now the flower. I doubled all of the colors rather than having even more shades of the flower. The Chrysanthemum can be found on page 47 of the booklet. The colors I used (from back to front) were Sapphire (X5774), Pacifica (X5759), Lagoon (X5762), Crystal Blue (1292), Glacier (X5770), and Sea Glass (X5789). To glue each layer together, I used Bonding Memories (Z553 or 1512). I then adhered the entire flower to the center of the Rose Gold Foil Tape with Liquid Glass. Finally, I finished the flower off with a White (or Black) dot from Black and White Dots (Z3314).
The saying is from the Flower Market Cricut Bundle (Z3285 or digital Z3290) stamped in Black ink (Z2805). Shop for your supplies to make your own!
Tuesday, March 14, 2017
Home is Where Your Heart is
I really like the Flower Market Cricut Collection. : )
I have a realtor friend who asks me to make cards for her business. This is the card I made for her this time around. The tulips, vase, and saying are from Flower Market.
The outside tulips are made from Blossom and Smoothie cardstock. The center tulip has added the colors Cotton Candy (retired) and Pixie. The stems are New England Ivy. The vase is Sea Glass, as is the heart of the saying (double meaning there!). The band and saying are cut from Pomegranate cardstock. The background and texture paper is from Wanderful (retired), but pairs quite nicely because it's Crystal Blue.
The last thing to know about the structure of the card is that it's an 8" x 3.5" card found in the pattern book Wishes. The title is Top Band which is located on page 100.
After cutting out and gluing the pieces together, I assembled the vase. Each card is slightly different in the angle of the flowers themselves and how they were glued into the vase. I tied White Twine around the center of the vase and then Thin Mounted the vase and flowers.
Yes, making 50 cards was labor intensive. But it's a labor of love and I really like the way they turned out. On to the next thing... my niece's wedding invitations!
I have a realtor friend who asks me to make cards for her business. This is the card I made for her this time around. The tulips, vase, and saying are from Flower Market.
The outside tulips are made from Blossom and Smoothie cardstock. The center tulip has added the colors Cotton Candy (retired) and Pixie. The stems are New England Ivy. The vase is Sea Glass, as is the heart of the saying (double meaning there!). The band and saying are cut from Pomegranate cardstock. The background and texture paper is from Wanderful (retired), but pairs quite nicely because it's Crystal Blue.
The last thing to know about the structure of the card is that it's an 8" x 3.5" card found in the pattern book Wishes. The title is Top Band which is located on page 100.
After cutting out and gluing the pieces together, I assembled the vase. Each card is slightly different in the angle of the flowers themselves and how they were glued into the vase. I tied White Twine around the center of the vase and then Thin Mounted the vase and flowers.
Yes, making 50 cards was labor intensive. But it's a labor of love and I really like the way they turned out. On to the next thing... my niece's wedding invitations!
Friday, March 3, 2017
Seven Things to do with Watercolor
I used my watercolor pencils on my February Stamp of the Month sample card and my March sample (I'm into the look!!). Jill from Close to my Heart shows us seven ways to use watercolor paint. What she shows is just the tip of the iceberg for watercolor paints!
Jill mentions using the paintbrush set. You might prefer to use our line of waterbrushes instead. Those work too. Think ideas rather than specific projects as you watch. Some product is retired, but the ideas are still good!
General Supplies for these projects:
Z2045 All-Purpose Mat (love this! Makes clean up a snap.)
Z3188 Paintbrush Set (you could go with the line of waterbrushes if you prefer
OR
Z3224 Small Round
Z3225 Medium Round
Z3226 Medium Flat
Z3132 Watercolor Paper (regular White Daisy doesn't absorb quite as well, but it is an alternative)
Z3167 Cricut Artistry Collection
Project 1: Striped Card
Z3167 Artistry Collection page 13 for the diamonds, cut at two sizes, page 1 for speaker bubble
retired stamp set
Project 2: Feel Better Soon Card
Z3167 Artistry Collection page 34 for the banner, page 43 for the circle
retired stamp set - could use B1543 Get Better
Project 3:
Z3167 Artistry Collection page 8
Project 4: Heart Background Layout (pause the video at 5:24 to get a good view of the layout)
Z3167 Artistry Collection page 27 for the heart. Jill was mistaken saying the hearts was an overlay. The heart overlay was created by adding enough hearts to fit the 10.5" x 10.5" paper.
retired stamp sets
Project 5: Be happy and Bright Card
Z3167 Artistry Collection page 21 for the flower, 27 for the leaves, 34 for the banner (cut two different sizes - see the carrier sheet for the size of the saying), and 46 for the background.
Project 6: Happy Layout
Z3167 Artistry Collection page 20 for the background
D1660 Ink Blot stamp set
Project 7: Tu Tu Cute Card
Z899 Black Memento Ink Pad
OR
Z3271 Archival Black Exclusive Ink
A1180 Safari Ballet stamp set
Jill mentions using the paintbrush set. You might prefer to use our line of waterbrushes instead. Those work too. Think ideas rather than specific projects as you watch. Some product is retired, but the ideas are still good!
General Supplies for these projects:
Z2045 All-Purpose Mat (love this! Makes clean up a snap.)
Z3188 Paintbrush Set (you could go with the line of waterbrushes if you prefer
OR
Z3224 Small Round
Z3225 Medium Round
Z3226 Medium Flat
Z3132 Watercolor Paper (regular White Daisy doesn't absorb quite as well, but it is an alternative)
Z3167 Cricut Artistry Collection
Project 1: Striped Card
Z3167 Artistry Collection page 13 for the diamonds, cut at two sizes, page 1 for speaker bubble
retired stamp set
Project 2: Feel Better Soon Card
Z3167 Artistry Collection page 34 for the banner, page 43 for the circle
retired stamp set - could use B1543 Get Better
Project 3:
Z3167 Artistry Collection page 8
Project 4: Heart Background Layout (pause the video at 5:24 to get a good view of the layout)
Z3167 Artistry Collection page 27 for the heart. Jill was mistaken saying the hearts was an overlay. The heart overlay was created by adding enough hearts to fit the 10.5" x 10.5" paper.
retired stamp sets
Project 5: Be happy and Bright Card
Z3167 Artistry Collection page 21 for the flower, 27 for the leaves, 34 for the banner (cut two different sizes - see the carrier sheet for the size of the saying), and 46 for the background.
Project 6: Happy Layout
Z3167 Artistry Collection page 20 for the background
D1660 Ink Blot stamp set
Project 7: Tu Tu Cute Card
Z899 Black Memento Ink Pad
OR
Z3271 Archival Black Exclusive Ink
A1180 Safari Ballet stamp set
Friday, January 27, 2017
Flower Market - Page 6 Key
I thought this year I'd share a video each Monday, but then I thought... "Maybe Friday would be better so that you could pull it up and work on it over the weekend." So, hopefully you'll like this feature. I might even try making a video or two for you this year.
Today's Flower Market video is for the key found on page 6 (and happens to be on page 6).
Here are the supplies used within this video:
C1631 Birthday Princess (layout - saying)
Z3255 Whimsy Fundamentals (layout - base)
Z3253 Adventure Fundamentals (layout - photo mat)
1385 White Daisy Cardstock (bucket with flowers, typewriter)
X5929 Whisper Cardstock (bucket, bucket with flowers, typewriter)
X5789 Sea Glass Cardstock - Color of the Year - available through July 2017 (flower card, bucket with flowers)
X5772 Canary Cardstock (flower 1, card, layout)
X5769 Thistle Cardstock (flower 1, layout)
X5782 Pansy Cardstock (flower 1, layout)
X5778 Saffron Cardstock (bucket)
X5777 Fern Cardstock (flower 1, layout)
X5788 Raspberry Cardstock (typewriter)
Z2873 Slate Ink (layout)
Z2840 Thistle Ink (layout)
Z3216 White Twine (flower card)
Z1263 Bitty Sparkles (flower card, layout)
Z553 Bonding Memories Glue Pen - 10ml
Z3285 Flower Market Cricut Collection
Today's Flower Market video is for the key found on page 6 (and happens to be on page 6).
Here are the supplies used within this video:
C1631 Birthday Princess (layout - saying)
Z3255 Whimsy Fundamentals (layout - base)
Z3253 Adventure Fundamentals (layout - photo mat)
1385 White Daisy Cardstock (bucket with flowers, typewriter)
X5929 Whisper Cardstock (bucket, bucket with flowers, typewriter)
X5789 Sea Glass Cardstock - Color of the Year - available through July 2017 (flower card, bucket with flowers)
X5772 Canary Cardstock (flower 1, card, layout)
X5769 Thistle Cardstock (flower 1, layout)
X5782 Pansy Cardstock (flower 1, layout)
X5778 Saffron Cardstock (bucket)
X5777 Fern Cardstock (flower 1, layout)
X5788 Raspberry Cardstock (typewriter)
Z2873 Slate Ink (layout)
Z2840 Thistle Ink (layout)
Z3216 White Twine (flower card)
Z1263 Bitty Sparkles (flower card, layout)
Z553 Bonding Memories Glue Pen - 10ml
Z3285 Flower Market Cricut Collection
Monday, January 23, 2017
Flower Market - Page 15 Key
I thought you might like this video of a couple of projects using the key found on page 15.
I particularly like the flower in the vase. I'll have to try that!
So you don't have to scramble to write down what was used, here they are:
Z3255 Whimsy Fundamentals (layout)
X5642 Cocoa Cardstock (layout and card)
1385 White Daisy Cardstock (layout and card)
X5771 Flaxen Cardstock (card)
X5777 Fern Cardstock (card)
X5774 Eggplant Cardstock (card)
X5643 Chocolate Cardstock (layout)
X5770 Glacier Cardstock (card)
Z1375 Kraft Cardstock (layout and card)
Z3265 School K-6 Complements (layout)
Z3266 School 7-12 Complements (layout)
Z3089 Grey Enamel Gems (layout)
Z3292 Rustic Home Ribbon Pack (layout and card)
Z3132 Watercolor Paint (background of card)
Z3188 Paintbrush Set (background of card)
Z3285 Flower Market Cricut Collection (layout and card)
Happy creating!
I particularly like the flower in the vase. I'll have to try that!
So you don't have to scramble to write down what was used, here they are:
Z3255 Whimsy Fundamentals (layout)
X5642 Cocoa Cardstock (layout and card)
1385 White Daisy Cardstock (layout and card)
X5771 Flaxen Cardstock (card)
X5777 Fern Cardstock (card)
X5774 Eggplant Cardstock (card)
X5643 Chocolate Cardstock (layout)
X5770 Glacier Cardstock (card)
Z1375 Kraft Cardstock (layout and card)
Z3265 School K-6 Complements (layout)
Z3266 School 7-12 Complements (layout)
Z3089 Grey Enamel Gems (layout)
Z3292 Rustic Home Ribbon Pack (layout and card)
Z3132 Watercolor Paint (background of card)
Z3188 Paintbrush Set (background of card)
Z3285 Flower Market Cricut Collection (layout and card)
Happy creating!
Monday, December 12, 2016
Flower Market 3D Poinsettia Wreath
Flower Market Cricut Collection (Z3285) also has the 3D poinsettia. The 2D wreath I made was similar to the Artiste wreath from 2015. Now it was time to go for gold with the 3D poinsettia.
Again on Design Space, I pulled in the poinsettia. When it comes in, each layer is separate but GROUPed. I, again, tried making this the same size as the 2D wreath and thought a total width of 5.41" would be the correct size for the bottom leafed layer (I would be mistaken. This turned out much bigger - the circle it's mounted on is 5" - than the other one - no worries though!).
The other "improvement" I wanted to make was to have a saying going across the opening of the wreath. That eventually led me to make a ring without a backing. It took 9 flowers to complete this wreath.

Because I put a bow on top of the wreath, I didn't want to add a loop like I did with the previous wreaths. You might be wondering how I will hang this up without a loop. To achieve it, I cut a piece of extra thick twine and adhered it to the back of the ring with Liquid Glass (Z679) (I love that stuff!).
Because I turned the leaves downwards, I mounted each flower with 3D foam (Z1151).
Colors I used were New England Ivy (1282) for the leaves, Ruby (X5927) for the back layer, two layers of Cranberry (1272), Poppy (X5779) for just behind the yellow centers, Lemon (X5785) for the larger yellow center, and Canary (X5772) for the smallest center. The Canary helped "calm" down the Lemon. Once I glued the flowers together, I took my Quilling Tool (Z1795) and turned the ends of each petal up (as I mentioned earlier, the leaves I turned down).
"Noel" is cut from our White Glitter Paper (Z3237) using the Flower Market cartridge. I adhered "Noel" with Liquid Glass. Finally, the bow is cut from Pomegranate cardstock (X5780), again from the Flower Market cartridge. The edges of the bow were sponged with Pomegranate ink ((Z2854), glued together, and then got a coating of Clear Shimmer Brush (Z3293). Once that dried, the bowed was adhered to the wreath with, none other, Liquid Glass!
Again on Design Space, I pulled in the poinsettia. When it comes in, each layer is separate but GROUPed. I, again, tried making this the same size as the 2D wreath and thought a total width of 5.41" would be the correct size for the bottom leafed layer (I would be mistaken. This turned out much bigger - the circle it's mounted on is 5" - than the other one - no worries though!).
The other "improvement" I wanted to make was to have a saying going across the opening of the wreath. That eventually led me to make a ring without a backing. It took 9 flowers to complete this wreath.

Because I put a bow on top of the wreath, I didn't want to add a loop like I did with the previous wreaths. You might be wondering how I will hang this up without a loop. To achieve it, I cut a piece of extra thick twine and adhered it to the back of the ring with Liquid Glass (Z679) (I love that stuff!).
Because I turned the leaves downwards, I mounted each flower with 3D foam (Z1151).
Colors I used were New England Ivy (1282) for the leaves, Ruby (X5927) for the back layer, two layers of Cranberry (1272), Poppy (X5779) for just behind the yellow centers, Lemon (X5785) for the larger yellow center, and Canary (X5772) for the smallest center. The Canary helped "calm" down the Lemon. Once I glued the flowers together, I took my Quilling Tool (Z1795) and turned the ends of each petal up (as I mentioned earlier, the leaves I turned down).
"Noel" is cut from our White Glitter Paper (Z3237) using the Flower Market cartridge. I adhered "Noel" with Liquid Glass. Finally, the bow is cut from Pomegranate cardstock (X5780), again from the Flower Market cartridge. The edges of the bow were sponged with Pomegranate ink ((Z2854), glued together, and then got a coating of Clear Shimmer Brush (Z3293). Once that dried, the bowed was adhered to the wreath with, none other, Liquid Glass!
Thursday, December 1, 2016
Large Paper Flower Tutorial
Close to my Heart posted this video on how the large paper flowers - found on page 14 of the 2016 Holiday Expressions and pictured after the video - are easily made.
As Gina explained, the petal is found on the Artistry cartridge and on page 27 of the booklet. You'll need 6 petals at the following sizes: 3", 4", 5", and 6".
Changing the paper changes the look. The picture to the right was made from Swan Lake papers.
Why not make some for a birthday party, bridal shower, baby shower, or just because?!
As Gina explained, the petal is found on the Artistry cartridge and on page 27 of the booklet. You'll need 6 petals at the following sizes: 3", 4", 5", and 6".
Changing the paper changes the look. The picture to the right was made from Swan Lake papers.
Why not make some for a birthday party, bridal shower, baby shower, or just because?!
Tuesday, November 22, 2016
Let's Celebrate Balloon
I really liked these Pinterest inspired cards. Lindsey's birthday is right before school gets out, and with Amber playing softball, we have tended not to have a birthday party in June. Because we didn't have a party this year, we decided to have a half birthday party instead, making this the perfect opportunity to make the card.
Most of the products used has been retired, but I think they fill the purpose too well. It's one reason why you can never have too many/much stamping stuff. : )
The paper is the Fundamental paper - Enchantment colors: Thistle, Olive, Goldrush, Autumn Terracotta, Hollyhock, and Indian Corn Blue. The ink color corresponds to the balloon color with the saying from the A Little of Everything set. The balloon strings are from the Metallic Twine - neutrals, Autumn Terracotta Twine, and Olive Twine. They are attached to the card with Liquid Glass, once the twine was knotted around the stem of the balloons.
Okay, so the meat of the card is the balloon. I chose to use the balloon from the Artistry Cricut Collection and is 4.5" wide. While I held the balloon down where I wanted it on the card, I cut the overhanging parts of the image. Then I tied the string onto the balloon, and mounted it with Thin 3D Foam. I changed up the bend of the string, and tada!
This card doesn't only have to be a birthday card. It can be used for any celebration. : )
Most of the products used has been retired, but I think they fill the purpose too well. It's one reason why you can never have too many/much stamping stuff. : )
The paper is the Fundamental paper - Enchantment colors: Thistle, Olive, Goldrush, Autumn Terracotta, Hollyhock, and Indian Corn Blue. The ink color corresponds to the balloon color with the saying from the A Little of Everything set. The balloon strings are from the Metallic Twine - neutrals, Autumn Terracotta Twine, and Olive Twine. They are attached to the card with Liquid Glass, once the twine was knotted around the stem of the balloons.
Okay, so the meat of the card is the balloon. I chose to use the balloon from the Artistry Cricut Collection and is 4.5" wide. While I held the balloon down where I wanted it on the card, I cut the overhanging parts of the image. Then I tied the string onto the balloon, and mounted it with Thin 3D Foam. I changed up the bend of the string, and tada!
This card doesn't only have to be a birthday card. It can be used for any celebration. : )
Sunday, November 20, 2016
Updated Poinsettia Wreath
On November 13th, I showed you how I made last year's poinsettia wreath. I made poinsettias from a non-poinsettia flower. I'm excited to share that the Flower Market Cricut Collection has 2 poinsettia flowers! So I'm re-visiting my wreath. First, let me show you the 2 dimensional poinsettia.
In Design Space, chose the poinsettia. All 4 pieces come into the work surface grouped, so you just need to resize the group instead of each piece separately. These images also come stacked. I sized the group to be 2.11" wide (height was locked to width). Why the extra 0.11"? I wanted to create the same size as last year's Artiste wreath and I thought this was the correct size. As it turns out, this wreath is larger than last year's. That's okay though, because I like it!
I sponged around the Cranberry petals with White Daisy Pigment ink. I put those aside to dry. You can always speed dry them with the Craft Heater. While they were drying, I glued the center Lemon on top of the Canary background for the centers. I also went and curled the New England Ivy leaves downward. I did this with a large balled stylus. When the petals were dried, I glued them onto each leaf and the center was added on top of each petal.
A 4" circle was cut from White Daisy cardstock. The poinsettia flowers were added to the edge with Thin Foam Tape. I realized afterward that I should have cut a ring of New England Ivy to adhere the flowers to so the white behind them wouldn't show. Too bad. The saying was stamped in New England Ivy and is from the October Stamp of the Month, but any nice saying would work.
Finally, the hanging ribbon and bow were from the White and Gold ribbon. I cut a second 4" circle and sandwiched the hanging ribbon between the two for a finished look.
That's it for this one!! I've been enjoying the Flower Market Collection. I'll be posting more samples from it (my Holiday Workshop has several items that used cuts from there) soon.
I sponged around the Cranberry petals with White Daisy Pigment ink. I put those aside to dry. You can always speed dry them with the Craft Heater. While they were drying, I glued the center Lemon on top of the Canary background for the centers. I also went and curled the New England Ivy leaves downward. I did this with a large balled stylus. When the petals were dried, I glued them onto each leaf and the center was added on top of each petal.
A 4" circle was cut from White Daisy cardstock. The poinsettia flowers were added to the edge with Thin Foam Tape. I realized afterward that I should have cut a ring of New England Ivy to adhere the flowers to so the white behind them wouldn't show. Too bad. The saying was stamped in New England Ivy and is from the October Stamp of the Month, but any nice saying would work.
Finally, the hanging ribbon and bow were from the White and Gold ribbon. I cut a second 4" circle and sandwiched the hanging ribbon between the two for a finished look.
That's it for this one!! I've been enjoying the Flower Market Collection. I'll be posting more samples from it (my Holiday Workshop has several items that used cuts from there) soon.
Sunday, November 13, 2016
Artiste Cartridge Poinsettia Wreath
For our November 2015 gathering, my Cardaholics group exchanged ornaments. Here is the ornament I made and exchanged:
I created the wreath using Design Space and one flower from the Artiste cartridge (retired). Okay, the circle was a second image from the cartridge.
The flower is from page 80 and is on <Accent1> of the leaf. There are three layers:
Small flower is 1.43" wide
Medium flower is 1.69" wide
Leaf flower is 2" wide
The easy way to create was to take one flower - the leaf. I added a hole in each flower (it doesn't exist on the image). Either ATTACH or WELD the two images together once you place the circle in the middle of the flower. Copy the image. Reduce the copied flower a little - that becomes the medium flower. Paste the image again and reduce the size more to make the small flower layer. I layered them and sized them until I liked the proportions (which is why I have odd sizes for the medium and small layers). Then I GROUPed the three flowers together, copied and pasted the group 8 times (for a total of 9 poinsettias). You can apply 9 on the cutting page, but I prefer to put the number of images within one wreath. Then I adjust the number of wreaths I was making on the cutting page (hopefully that makes sense), that way I can cut my ring (see below), and white circle, at the same time. I need 9 poinsettias but only 1 ring and 1 circle per wreath.
Once everything was cut out, I sponged the edges of the Cranberry cardstock (flowers) with White Daisy pigment ink. Set these aside for some time to allow the pigment ink to dry.
After the ink dried, I used a large balled stylist to curve each petal. I curved the New England Ivy leaf the opposite direction of the Cranberry flowers.
Assembly of Poinsettias: I took a yellow chenille and curved the very tip just a little with some needle nosed pliers. Then I put the flowers on from the smallest to the largest. I bent the chenille a little underneath to keep the flower in place and clipped the chenille with wire cutters. Repeat that 8 more times.
Creating the Wreath: I wanted the poinsettias to sit on a New England Ivy ring. To make a ring, I made a 3.9" circle and a 2.9" circle. I overlaid the small circle in the middle of the large circle and GROUPED and then ATTACHED the two circles. The inner 2.9" circle would be recycled.
The saying was stamped in New England Ivy on a 3.9" White Daisy circle. Red Striped Twine creating a loop was taped onto the back of the New England Ivy ring so that when the stamped circle was glued to the New England Ivy ring the ends of the twine wouldn't show.
Each poinsettia got a 3D foam piece on the back and placed onto the New England Ivy ring. And finally, the red striped twine was made into a bow and Liquid Glass adhered under the saying.
Pretty cool, huh?!
I created the wreath using Design Space and one flower from the Artiste cartridge (retired). Okay, the circle was a second image from the cartridge.
The flower is from page 80 and is on <Accent1> of the leaf. There are three layers:
Small flower is 1.43" wide
Medium flower is 1.69" wide
Leaf flower is 2" wide
The easy way to create was to take one flower - the leaf. I added a hole in each flower (it doesn't exist on the image). Either ATTACH or WELD the two images together once you place the circle in the middle of the flower. Copy the image. Reduce the copied flower a little - that becomes the medium flower. Paste the image again and reduce the size more to make the small flower layer. I layered them and sized them until I liked the proportions (which is why I have odd sizes for the medium and small layers). Then I GROUPed the three flowers together, copied and pasted the group 8 times (for a total of 9 poinsettias). You can apply 9 on the cutting page, but I prefer to put the number of images within one wreath. Then I adjust the number of wreaths I was making on the cutting page (hopefully that makes sense), that way I can cut my ring (see below), and white circle, at the same time. I need 9 poinsettias but only 1 ring and 1 circle per wreath.
Once everything was cut out, I sponged the edges of the Cranberry cardstock (flowers) with White Daisy pigment ink. Set these aside for some time to allow the pigment ink to dry.
After the ink dried, I used a large balled stylist to curve each petal. I curved the New England Ivy leaf the opposite direction of the Cranberry flowers.
Assembly of Poinsettias: I took a yellow chenille and curved the very tip just a little with some needle nosed pliers. Then I put the flowers on from the smallest to the largest. I bent the chenille a little underneath to keep the flower in place and clipped the chenille with wire cutters. Repeat that 8 more times.
Creating the Wreath: I wanted the poinsettias to sit on a New England Ivy ring. To make a ring, I made a 3.9" circle and a 2.9" circle. I overlaid the small circle in the middle of the large circle and GROUPED and then ATTACHED the two circles. The inner 2.9" circle would be recycled.
The saying was stamped in New England Ivy on a 3.9" White Daisy circle. Red Striped Twine creating a loop was taped onto the back of the New England Ivy ring so that when the stamped circle was glued to the New England Ivy ring the ends of the twine wouldn't show.
Each poinsettia got a 3D foam piece on the back and placed onto the New England Ivy ring. And finally, the red striped twine was made into a bow and Liquid Glass adhered under the saying.
Pretty cool, huh?!
Sunday, November 6, 2016
Flower Market Sunflower Birthday Card
My Cardaholics group card challenge was birthday cards. Since I got my new cartridge, I thought I'd make my card using it. And I thought I'd make one a little more masculine. This is what came out:
Colors of this card:
Sapphire - background. Sanded.
Saffron - flower base
Goldrush - flower outline
New England Ivy - stems
Crystal Blue - background to banner
Chocolate - banner outline and flower center backgrounds
Saddle - center of flower
White Daisy - card base
The center flower's stem is two stems glued together. If I were to have elongated the stem, it would have been out of proportion.
The banner is mounted with Thin 3D Foam. And the flower centers have been "painted" with the Shimmer Glitter pen. I have to say that the pen barfed a little too much for my taste. This was the first card I made using the pen. Subsequent cards didn't have quite so much. : )
So, where did the sunflowers come from? Take a look at page 7. These were cut in three different sizes (although the two smaller ones are close to the same size).
And the title comes from page 39.
The nice thing about using Design Space is that the images come grouped so that when you size the image, everything associated with it stays in proportion. :) That and saving the file for later use.
So, where did the sunflowers come from? Take a look at page 7. These were cut in three different sizes (although the two smaller ones are close to the same size).
And the title comes from page 39.
The nice thing about using Design Space is that the images come grouped so that when you size the image, everything associated with it stays in proportion. :) That and saving the file for later use.
Sunday, October 23, 2016
Convention 2016 Roomie Gift
Would you like to receive this as a gift? Making it is pretty simple, especially if you have Close to my Heart's Art Philosophy Cricut Cartridge (retired). If you don't, you can make modifications.
First of all, these cards were inspired by Denice Park and Linda Case. Years ago, they gave me a print out of the cards they made.
These cards are the same cut but different colors. The colors are Pear, Honey, Hollyhock, and Lagoon. The flowers, though two designs, are Sapphire and Champagne. The card bases are Kraft paper. Matching Kraft envelopes (not shown) were cut from the cartridge too.
The focal circle is raised with Thin 3D foam (it's kind of hard to tell from the pictures).
Before I get into the details of the sizes and such of the cards, let me show you the holder.
Cashmere ink was used to sponge edge distress all sides of the holder and the White Daisy belly band. Sapphire ink was used to stamp the saying (Bitty Birthday - M1144 - retired).
Belly band is 1.5" x 9" and is scored at 2 3/8", 3", 6 5/8", and 7.25". Be aware: the band will fit the holder in one direction and not the other.
Here is a close-up picture of the flowers.
These were cut from page 70. Cut at 2.5" (honey), 2.25" (hollyhock), and 2" (lagoon). The simple flowers can be found at <cupcake><font><shift>.
Once they are rolled, they are kept together by putting a blob of Liquid Glass on the bottom. Rather than holding it in place with my finger (the center tends to want to pop out), I put an acrylix block on top each flower.
The leaves are from page 59 or <petal2><shift> and cut from Pear cardstock.
So, like I said, each card is the same. I changed the background color, the flower types, and the sayings.
This flower is on the Lagoon and Honey card. It is from page 29 <flower6><shift>. The outline is from the same key but is <flower6><layer><shift>. Sapphire is the base of the flower, as is the ink for the saying, Bitty Birthday(M1144 - retired). Inkblot (D1660) stamped in Cashmere adds some more interest.
This flower is on the Pear and Hollyhock cards. It can be found on page 50 <flower8><shift>. Outline is <flower8><layer><shift>.
The mat is from <square7> found on page 39. The card base is <square7><card>, also found on page 39. The envelopes, 4" in height, for these four cards are back on page 29 <flower6><font layer><shift>. Finally, the circle is 2.25" and is from page 21.
Did I miss anything? Yes. Each card has White Twine with a bow along the seam. And here they are all together. : )
First of all, these cards were inspired by Denice Park and Linda Case. Years ago, they gave me a print out of the cards they made.
These cards are the same cut but different colors. The colors are Pear, Honey, Hollyhock, and Lagoon. The flowers, though two designs, are Sapphire and Champagne. The card bases are Kraft paper. Matching Kraft envelopes (not shown) were cut from the cartridge too.
The focal circle is raised with Thin 3D foam (it's kind of hard to tell from the pictures).
Before I get into the details of the sizes and such of the cards, let me show you the holder.
Cashmere ink was used to sponge edge distress all sides of the holder and the White Daisy belly band. Sapphire ink was used to stamp the saying (Bitty Birthday - M1144 - retired).
Belly band is 1.5" x 9" and is scored at 2 3/8", 3", 6 5/8", and 7.25". Be aware: the band will fit the holder in one direction and not the other.
Here is a close-up picture of the flowers.
These were cut from page 70. Cut at 2.5" (honey), 2.25" (hollyhock), and 2" (lagoon). The simple flowers can be found at <cupcake><font><shift>.
Once they are rolled, they are kept together by putting a blob of Liquid Glass on the bottom. Rather than holding it in place with my finger (the center tends to want to pop out), I put an acrylix block on top each flower.
The leaves are from page 59 or <petal2><shift> and cut from Pear cardstock.
So, like I said, each card is the same. I changed the background color, the flower types, and the sayings.
This flower is on the Lagoon and Honey card. It is from page 29 <flower6><shift>. The outline is from the same key but is <flower6><layer><shift>. Sapphire is the base of the flower, as is the ink for the saying, Bitty Birthday(M1144 - retired). Inkblot (D1660) stamped in Cashmere adds some more interest.
This flower is on the Pear and Hollyhock cards. It can be found on page 50 <flower8><shift>. Outline is <flower8><layer><shift>.
The mat is from <square7> found on page 39. The card base is <square7><card>, also found on page 39. The envelopes, 4" in height, for these four cards are back on page 29 <flower6><font layer><shift>. Finally, the circle is 2.25" and is from page 21.
Did I miss anything? Yes. Each card has White Twine with a bow along the seam. And here they are all together. : )
Monday, October 17, 2016
Seaglass as Masculine?!
What do you get when you mix a light colors with a more masculine element? A beautiful card!
This card features some new products too. Bonus!
The ax is from the new Flower Market Cricut Collection (Z3285), cut from Chocolate (X5643) and Cashmere (X5932) cardstock. I sanded the handles to make them look a little more weathered, and then raised them with Thin 3D Foam (Z2060). The background is Seaglass Cardstock (X5789) dry embossed with Happy Thoughts Embossing Folder (Z3249). I wanted to highlight "Be Happy" so I sanded it to reveal the white core. Having all the different words is what I like about this embossing folder. Using ink to highlight a word is another option.
The saying is one of the sayings that comes with the Flower Market Collection. That was stamped with Chocolate ink (Z2811) on Slate (X5930) cardstock. The card is finished off with Silver Assortment sequins (Z2013).
The pattern for this card came from CAS(E) This Sketch #180. : )
This card features some new products too. Bonus!
The ax is from the new Flower Market Cricut Collection (Z3285), cut from Chocolate (X5643) and Cashmere (X5932) cardstock. I sanded the handles to make them look a little more weathered, and then raised them with Thin 3D Foam (Z2060). The background is Seaglass Cardstock (X5789) dry embossed with Happy Thoughts Embossing Folder (Z3249). I wanted to highlight "Be Happy" so I sanded it to reveal the white core. Having all the different words is what I like about this embossing folder. Using ink to highlight a word is another option.
The saying is one of the sayings that comes with the Flower Market Collection. That was stamped with Chocolate ink (Z2811) on Slate (X5930) cardstock. The card is finished off with Silver Assortment sequins (Z2013).
The pattern for this card came from CAS(E) This Sketch #180. : )
Friday, September 16, 2016
Beyond Blessed - September 2016 Stamp of the Month Sample
Here is my latest creations using Beyond Blessed (S1609). I was making cards for a team meeting swap. I started with the simplest of the three. It was okay for me, and for most people. But, as I looked at it, I thought it was missing something. I thought I'd add some vines. That's my second (middle) card. I was happy with that one! And that's the card I made for my exchange.
However, while I was assembling those cards, I thought how neat it would be to add some leaves. I admit that the third card is a bit over the top - and I'm okay with that because I love the way it turned out!
Let me tell you a little more about each one. The three cards have a few things in common. First, the card pattern came from Make it From Your Heart volume #2 and is pattern #20.
The card bases background is from the Rustic Home Fundamental pack (Z3262). You can see two different sheets were used, both equally pretty. I embossed the saying in Gold embossing powder (Z2066) - VersaMark ink (Z891) to hold the powder - on New England Ivy cardstock (1282). That was then sponged distressed with New England Ivy ink (Z2835). The Colonial White(1388) mat was stamped in Saffron ink (Z2751) for the leaves and Goldrush ink (Z2223) for the berries. The mat was then sponged distressed in Goldrush ink.
The accessories you see once were clear sparkles (Z3274 (middle sized), Z1263 (bitty sized), and retired for the large sparkle). But I didn't want see through, bright accessories. So I colored them. I found that by first coloring them with Marigold ShinHam marker (Z2457) then the Metallic Gold marker (Z1768), the Gold looked a little more rustic.
Each pumpkin was stamped twice. The first time I used Saffron ink. I waited a little bit (maybe 5 minutes) and then applied a rolled Goldrush ink layer. I can do this because of the awesomely clear stamps and blocks! I just lined up the image and pressed. : ) Now, I rolled in Goldrush to give the pumpkin some dimension. That was good. I waited about 5 minutes because the Saffron and Goldrush are so close together that when I inked in Saffron and rolled in Goldrush, then stamped, the color difference was lost. Not good. By waiting the 5 minutes, it allowed the Saffron to dry and be absorbed into the Colonial White cardstock.
My simple card's pumpkin was cut out from Artbooking Cricut Collection (Z3169). It's found on page 73 of the booklet or row 4 column 6 (R4C6) on the keypad. It's also under the ICON key.
I colored the top of the cut out image with Sap Green (Z2463), using both the fine tip and broad tip of the ShinHam marker.
I added some Thin Foam Tape(Z2060) to the back of the pumpkin, and placed it on.
The background mat is Ruby from the Enchantment Fundamental pack (3254). I love the versatility of the new papers in the Annual Inspirations book.
This card isn't too far off from the simple card. I just wanted to add a little more to the pumpkin. I found that inspiration from the page in the Artbooking booklet with the vine and leaves. Page 72, BORDER, row 4 column 5. Shift gets the leaves by themselves.
My first attempt, I just cut out the vine in New England Ivy. My daughter didn't like how it disappeared into the "Thankful" (I had it on the other side originally). That led me to cutting the vine in Fern cardstock (X5777) and the leaves in New England Ivy cardstock. Since I cut the images out in Design Space, I removed the hearts from the vine's leaves. I wanted (and did) to color the centers with Gold Metallic marker to incorporate more of the gold color. It's hard to see in the picture, but each leaf has a gold heart.
To attach the small New England Ivy leaves, I use bonding memory glue (in this case the small tipped one - Z553) to the leaf and glue it onto the corresponding vine's leaf.
Like I mentioned, while I was putting the vines together, I thought "how cool would that be to have the pumpkin in a bed of fallen leaves?!" The leaves are also from Artbooking and on page 72. They are just one leaf, cut out multiple times. This is the base of the leaf found under ICON. They were cut from Colonial White cardstock. I sponged each of the leaves with different colors. Each got a Saffron base. Some got just Goldrush. Others got Goldrush and Ruby (Z2870). Still others got Eggplant (Z2847). Two I added Eggplant and a little bit of Sapphire (Z2848). Then I glued some directly to the paper while others I used Thin Foam Tape to pop a little.
I used two vined leaves for this card too. I cut one vine off just above the middle leaf as well as the connector from the small leaf to the middle leaf with scissors.
The pumpkin was hand cut. The stem is New England Ivy ink. The background mat is Pomegranate. Honestly, I was going to use Pomegranate for all of my cards, but I accidentally cut the Ruby paper. It was a nice mistake. : ) And originally I was going to use Gold Sequins with this card. But I forgot that. I like the Gold Metallic colored sparkles though.
So, which is your favorite?! And don't forget that this stamp set is only available until the end of the month.
However, while I was assembling those cards, I thought how neat it would be to add some leaves. I admit that the third card is a bit over the top - and I'm okay with that because I love the way it turned out!
Let me tell you a little more about each one. The three cards have a few things in common. First, the card pattern came from Make it From Your Heart volume #2 and is pattern #20.
The card bases background is from the Rustic Home Fundamental pack (Z3262). You can see two different sheets were used, both equally pretty. I embossed the saying in Gold embossing powder (Z2066) - VersaMark ink (Z891) to hold the powder - on New England Ivy cardstock (1282). That was then sponged distressed with New England Ivy ink (Z2835). The Colonial White(1388) mat was stamped in Saffron ink (Z2751) for the leaves and Goldrush ink (Z2223) for the berries. The mat was then sponged distressed in Goldrush ink.
The accessories you see once were clear sparkles (Z3274 (middle sized), Z1263 (bitty sized), and retired for the large sparkle). But I didn't want see through, bright accessories. So I colored them. I found that by first coloring them with Marigold ShinHam marker (Z2457) then the Metallic Gold marker (Z1768), the Gold looked a little more rustic.
Each pumpkin was stamped twice. The first time I used Saffron ink. I waited a little bit (maybe 5 minutes) and then applied a rolled Goldrush ink layer. I can do this because of the awesomely clear stamps and blocks! I just lined up the image and pressed. : ) Now, I rolled in Goldrush to give the pumpkin some dimension. That was good. I waited about 5 minutes because the Saffron and Goldrush are so close together that when I inked in Saffron and rolled in Goldrush, then stamped, the color difference was lost. Not good. By waiting the 5 minutes, it allowed the Saffron to dry and be absorbed into the Colonial White cardstock.
My simple card's pumpkin was cut out from Artbooking Cricut Collection (Z3169). It's found on page 73 of the booklet or row 4 column 6 (R4C6) on the keypad. It's also under the ICON key.I colored the top of the cut out image with Sap Green (Z2463), using both the fine tip and broad tip of the ShinHam marker.
I added some Thin Foam Tape(Z2060) to the back of the pumpkin, and placed it on.
The background mat is Ruby from the Enchantment Fundamental pack (3254). I love the versatility of the new papers in the Annual Inspirations book.
This card isn't too far off from the simple card. I just wanted to add a little more to the pumpkin. I found that inspiration from the page in the Artbooking booklet with the vine and leaves. Page 72, BORDER, row 4 column 5. Shift gets the leaves by themselves.
My first attempt, I just cut out the vine in New England Ivy. My daughter didn't like how it disappeared into the "Thankful" (I had it on the other side originally). That led me to cutting the vine in Fern cardstock (X5777) and the leaves in New England Ivy cardstock. Since I cut the images out in Design Space, I removed the hearts from the vine's leaves. I wanted (and did) to color the centers with Gold Metallic marker to incorporate more of the gold color. It's hard to see in the picture, but each leaf has a gold heart.
To attach the small New England Ivy leaves, I use bonding memory glue (in this case the small tipped one - Z553) to the leaf and glue it onto the corresponding vine's leaf.
Like I mentioned, while I was putting the vines together, I thought "how cool would that be to have the pumpkin in a bed of fallen leaves?!" The leaves are also from Artbooking and on page 72. They are just one leaf, cut out multiple times. This is the base of the leaf found under ICON. They were cut from Colonial White cardstock. I sponged each of the leaves with different colors. Each got a Saffron base. Some got just Goldrush. Others got Goldrush and Ruby (Z2870). Still others got Eggplant (Z2847). Two I added Eggplant and a little bit of Sapphire (Z2848). Then I glued some directly to the paper while others I used Thin Foam Tape to pop a little.
I used two vined leaves for this card too. I cut one vine off just above the middle leaf as well as the connector from the small leaf to the middle leaf with scissors.
The pumpkin was hand cut. The stem is New England Ivy ink. The background mat is Pomegranate. Honestly, I was going to use Pomegranate for all of my cards, but I accidentally cut the Ruby paper. It was a nice mistake. : ) And originally I was going to use Gold Sequins with this card. But I forgot that. I like the Gold Metallic colored sparkles though.
So, which is your favorite?! And don't forget that this stamp set is only available until the end of the month.
Sunday, August 28, 2016
Flower Market Friends Banner Card

I received this card from a friend (and consultant) of mine, and fell in love with it. She made it with the new Flower Market Cricut Collection. As you look at the details, notice the texture of the flower and leaves. Those are two stamps from the three stamp sets that come with the collection.
So, I had to lift Candace's card and knew the perfect card to use it for. My Cardaholic's challenge was to use summer colors - vivid yellow, orange, pink, and green. I was going to a adopt Candace's card.
This is what mine turned into. I used Design Space to create it. Using Design Space allowed me to create the card base as well as the petals and leaves fill in. Let me explain...
CARD BASE (my picture cut off the bottom - look at the below image to see the points of the card): After importing the image, I copied and pasted it. I will use the second copy for the "detailed" work. To the first copy, I ungrouped the images and then deleted the top part, leaving the solid banner. I then sized the banner to my desired size (I kept the size linked/locked) - about 4" x 5.5" - I wanted the card to be able to fit into a standard envelope. Now that was done, I copied the image, rotated it 180 degrees, butted the straight sides together and welded the two images. Once that was done, I added a score line at the seam.
DETAIL: Next, I sized the detail to match the card base. Easy peasy. I made another two copies of this and pasted them.
FLOWER: With one of the copies, I ungrouped the pieces and deleted the solid banner. I then went into "Hide contour" and hid everything but the five petals. I then enlarged the petals so that I could glue them to the underside of the flower. It's hard to tell, but I embossed the leaves with clear embossing powder. I used the same stamp set Candace did. Then I used Bonding Memory Glue on the Whisper cardstock flower outline and adhered the petals. Canary was the color of choice.
LEAVES: The second (really my third) copy of the banner was used for the leaves. I repeated the FLOWER process for the leaves. This time I stamped tone on tone (Pear ink on Pear paper).
FRIENDS: This was cut out with Whisper cardstock.
By using the Hide Contour feature, I didn't have to cut the whole top part out in the different colors. Therefore I had very little waste of paper. : )
The card was finished off with some bakers twine threaded through a bling button.
Here are the cards side by side...
You can see what a difference colors can make. : )
To note: Candace uses an Expressions machine and doesn't use Design Space. Design Space isn't needed, but it's nice if I need to make this card in the future, I can just access the file. You'd be able to replicate this in Craft Room too (for Expressions machines). Design Space is for Explore or Air machines. If you haven't purchased a machine yet, I suggest the Explore or Air. Although the prices of the Expressions have dropped, they are being phased out. You'll need to start using Craft Room as more cartridges go digital. Design Space is a much more powerful program. The disadvantage to the Explore/Air is that the machine is not a stand alone - you need a computer to cut your images. Using the Craft Room will require your machine be connected to the computer though.
Subscribe to:
Posts (Atom)
























